Widely used for Convectory heater, Radiant heater, sauna room,Glass, mica compound heater,Physiatrics bed,Wax melter etc

Basic Specification

Detail Description

Mica heating board/panel adopts different kinds of nonmetal conductive materials and radiated materials such as inorganic ceramic and glass to form an inorganic conductive resistance film on its surface, through different techniques such as printing, high temperature sintering and envelopment. It comes into being a whole unit whose outer surface covered with mica insulated slice and hemmed with metal. When it is electrified, the electric resistance film gives out infrared heat to form heat radiant point and heat itself through convection.
     
     Performance Features of Mica Heating Board/Panel: 
     1. The element produces no open flame and oxygenation when it works. The using life is 50 times more than ordinary electric heating wire element.
     2. The element gives out high far-infrared radiation whose infrared wavelength is 2-15um, which is helpful to our health.
     3. Made of inorganic material, the element can provide steady performance, low thermal inertia and fast increased temperature. And the electricity performance will not change under work state and reserve state.
     4. The element is a kind of planar heat source which equally heat in full area and its degree of uniformity reaches 85%. 
     5 .It is a kind of minus temperature coefficient electric heating element, no security threat from shock current. 
     
     Application of Mica Heating Board/Panel: 
     •Convectory heater •Radiant heater •far-infrared light wave room(sauna room)
     •Glass, mica compound heater •Physiatrics bed •Wax melter
     
     Specification of Mica Heating Board/Panel: 
     1. Electricity Capacity: 1500V／1min 5mA, no phenomena of breakdown and flashover;
     2. Long using life (≤210℃ controlled dry burning) ≥20000 hours;
     3. Power tolerance: +5-10%;
     4. Power consistency (effective heating area of film, its power consistency is related to the structure of entire machine) ≤ 0.55W／CM²;
     5. Supply voltage: AC or DC;
     6. Element dimension: Non-standard element can be made according to the customer's requirement.